N-phenylmaleimide N-PMI
Ⅰ.Product introduction
Product name: N-phenylmaleimide (N-PMI)
Abbreviation: N-PMI
Molecular formula: C10H7NO2
Molecular weight: 173.168
Physical and Chemical Characteristics: light yellow needle crystal, insoluble in water, petroleum ether, soluble in general organic solvents.
CAS NO: 941-69-5
Ⅱ.Technical indicators
Appearance
Melting point
Specification
Solubility
Light yellow needle-like crystals
85-90℃
>98%
Soluble in organic solvents
Ⅲ.Application
(1) N-PMI can be used as vulcanization crosslinking agent in natural rubber and synthetic rubber.
(2) N-PMI can be used as heat-resistant modifier in ABS, PVC, PMMA resins and photographic materials, which can improve the heat resistance, impact resistance, hot-melt and processability of the resin, etc. N-PMI can increase the heat distortion temperature by 2°C by adding 1% of N-PMI as a copolymerization monomer in ABS, and the heat-resistant temperature of N-PMI can reach 125-130°C by 10% of N-PMI blended with ABS.
(3) N-PMI can be used as resin intermediates, used to manufacture heat-resistant polymers, plant growth promoters and other agrochemicals.
(4) N-PMI also has some antibacterial activity, coatings, adhesives, photopolymeric resins, rubber vulcanization accelerators, raw materials for insulating paints, pharmaceuticals, pesticides (fungicides, antifungal agents) intermediates ,marine anti-fouling material and so on.
If you have any questions,pls feel free to contact: business@xysjgm.com
When purchasing N-phenylmaleimide, buyers must pay attention to several key factors to ensure you are getting a high-quality product that meets your requirements:
Purity: Check the purity level of the supplied N-phenylmaleimide. Higher purity ensures better performance and fewer impurities that could affect downstream reactions or product quality.
Quality Control Standards: Ensure that manufacturers follow strict quality control standards and procedures to maintain product consistency and reliability. Look for certifications or compliance with industry standards.
Packaging: Verify that product packaging is appropriate to prevent contamination or degradation during storage and transportation. Properly sealed containers and appropriate labeling help maintain product integrity.
Handling and Storage Guidelines: Know the recommended handling and storage conditions for N-phenylmaleimide to avoid degradation or loss of potency. Temperature, humidity and light all affect its stability.
Supplier Reputation: Choose a reputable supplier with a proven track record of delivering high-quality chemicals and providing excellent customer service. Customer reviews and references can provide valuable insights into a supplier's reliability.
Safety Data Sheet (SDS): Ask your supplier for the Safety Data Sheet for N-phenylmaleimide to understand its hazards, safe handling procedures, and emergency response measures. Complying with safety regulations is critical when handling hazardous chemicals.
Batch consistency: Query the consistency between batches to ensure the consistency of product quality and performance. Consistent quality is especially important for processes that require precise control of reaction conditions.
Technical Support: Evaluate the level of technical support provided by the vendor, especially if you need help with product selection, troubleshooting, or application-specific advice.
N-Phenylmaleimide 97% N-PMI (ABS heat-resistant agent) manufactured by Yangchen Tech is used as a heat-resistant modifier in ABS, PVC, PMMA resins and photosensitive materials to improve the heat resistance, impact resistance, and hot melt resistance of the resin properties and processability, etc. When NPMI is added as a comonomer to ABS, the heat distortion temperature can be increased by 2°C; when 10% of NPMI is blended with ABS, the heat-resistant temperature can reach 125-130°C. Welcome Inquiry!
In the fiercely competitive landscape of modern manufacturing, staying ahead requires innovation and excellence. When it comes to enhancing polymer properties, one compound stands out for its remarkable versatility and transformative power: N-phenylmaleimide (NPMI). Let’s take a closer look at how NPMI by Yangchen Tech can enhance your products and provide a significant competitive advantage in various industries.
Unleashing the potential of N-phenylmaleimide:
N-Phenylmaleimide manufactured by Yancghen tech, often abbreviated as NPMI, is used as a heat-resistant modifier in reinforcing acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), photosensitive materials and polyethylene Methyl methacrylate (PMMA) resin has good efficacy in terms of performance. Its unique chemistry allows it to improve several key aspects of these resins, including heat resistance, impact resistance, hot meltability and processability.
Enhanced heat resistance:
One of the most significant advantages of incorporating NPMI into resin formulations is the dramatic improvement in heat resistance. Even at low concentrations, NPMI can significantly increase the heat distortion temperature of ABS. For example, adding 1% NPMI as a comonomer to ABS can increase the heat deflection temperature by 2°C. In addition, a higher concentration of 10% NPMI mixed with ABS can push the heat resistance temperature to the range of 125-130°C. This enhancement is valuable for applications that are frequently exposed to high temperatures, such as automotive components and electrical enclosures.
Improve impact resistance:
In addition to heat resistance, NPMI also enhances the impact resistance of resins, making them more resilient to mechanical stress and impact. This property is particularly important in applications where durability and toughness are critical, such as consumer electronics, industrial machinery and construction materials. By adopting NPMI, manufacturers can ensure that their products maintain their integrity even under harsh conditions, thereby increasing their reliability and longevity.
Improve hot meltability and processing performance:
Another key advantage of NPMI is its ability to improve the resin's hot melt and processability properties. By optimizing melt flow characteristics and reducing viscosity, NPMI helps achieve smoother processing and enables more efficient manufacturing processes. This enhancement streamlines production workflows, reduces manufacturing defects, and ultimately increases overall productivity and output.
Welcome Inquiry!
CAS No :
941-69-5
Name :
N-Phenylmaleimide
Abbreviation :
N-PMI
Appearance :
Light yellow needle crystal
Molecular Formula :
C10H7NO2
Molecular weight :
173.168
Lead Time :
1-3 Days
Shipping port :
Shanghai
In the world of chemical manufacturing and supply, the choice of a reliable and trustworthy partner can make all the difference,when it comes to procuring N-Phenylmaleimide (NPMI). Let's explore why Yangchen Tech should be your preferred choice when purchasing NPMI.
Uncompromising Quality:
At Yangchen Tech, quality is the cornerstone of everything we do. We adhere to stringent quality control measures throughout the manufacturing process to ensure that our NPMI meets the highest standards of purity and performance. Each batch undergoes rigorous testing and analysis, allowing us to deliver a product of unparalleled quality and consistency to our customers.Our purity is 99%.
Industry Expertise:
With years of experience in the chemical industry, Yangchen Tech brings a wealth of expertise and knowledge to the table. Our team of seasoned professionals is well-versed in the intricacies of chemical synthesis and formulation, allowing us to provide expert guidance and support to our customers. Whether you have questions about product specifications, application compatibility, or regulatory compliance, our team is here to assist you every step of the way.
State-of-the-Art Facilities:
At Yangchen Tech, we invest in cutting-edge technology and state-of-the-art facilities to ensure the highest level of manufacturing precision and efficiency. Our modern production facilities are equipped with the latest equipment and instrumentation, allowing us to produce NPMI of the highest purity and quality consistently. We employ strict quality control protocols and adhere to industry best practices to guarantee the integrity and reliability of our products.
Customer-Centric Approach:
At the heart of Yangchen Tech's philosophy is a deep commitment to customer satisfaction. We prioritize the needs and requirements of our customers above all else, striving to exceed their expectations at every turn. Whether you require custom formulations, expedited shipping, or technical assistance, we go above and beyond to ensure that your experience with Yangchen Tech is nothing short of exceptional.
Comprehensive Support:
When you choose Yangchen Tech as your supplier of NPMI, you gain access to comprehensive support and resources. Our team of experts is available to provide technical guidance, product recommendations, and troubleshooting assistance to help you achieve optimal results in your applications. We are dedicated to your success and are here to support you every step of the way.
1. What is N-Phenylmaleimide (NPMI)?
N-Phenylmaleimide (NPMI) manufactured by Yangchen Tech is an organic compound used as a monomer in the production of various polymers. It is known for its ability to enhance thermal stability, mechanical strength, and chemical resistance in polymers.
2. What are the primary applications of N-Phenylmaleimide?
NPMI is primarily used in:
High-performance polymers and resins
Heat-resistant adhesives and sealants
Engineering plastics
Coatings
Electronic materials
Specification
ITEM
Limits
Results
Appearance
Yellow powder
Yellow powder
Purity%
≥98
98.5
Melting Point℃
≥85
89
Ash%
≤0.3
0.01
Water%
≤0.5
0.05
Acidity mgkoH/g
≤3
0.38
3. How does N-Phenylmaleimide improve the properties of polymers?
NPMI manufactured by Yangchen Tech improves polymers by:
Enhancing thermal stability, allowing the polymer to maintain its integrity at high temperatures.
Increasing mechanical strength, making the polymer more durable and resistant to wear and tear.
Providing chemical resistance, protecting the polymer from degradation by chemicals.
4. Can N-Phenylmaleimide be used in automotive applications?
Yes, NPMI is used in automotive applications to produce components that require high heat resistance and durability, such as engine parts, exhaust systems, and brake systems.
5. Is N-Phenylmaleimide compatible with other monomers?
NPMI is compatible with a variety of monomers, including styrene and maleic anhydride, allowing it to be used in the production of copolymers and terpolymers with tailored properties.
6. What are the safety precautions when handling N-Phenylmaleimide?
When handling NPMI, follow these safety precautions:
Use personal protective equipment (PPE), such as gloves, goggles, and lab coats.
Ensure proper ventilation in the working area.
Follow the safety data sheet (SDS) instructions for safe handling, storage, and disposal.
7. How does N-Phenylmaleimide enhance heat resistance in polymers?
NPMI introduces imide groups into the polymer chain, which are known for their high thermal stability. This structural modification helps the polymer withstand higher temperatures without degrading.
8. Why choose Yangchen Tech for your N-Phenylmaleimide supply?
Choosing Yangchen Tech for your NPMI supply ensures:
Quality Assurance: High-quality NPMI that meets rigorous industry standards.
Innovative Solutions: Advanced formulations tailored to meet specific industrial needs.
Technical Expertise: Comprehensive support and guidance from experienced professionals.
Global Reach: Reliable and timely delivery through a robust distribution network.
Sustainability Commitment: Commitment to eco-friendly practices in manufacturing and product development.
9. How can I get more information or place an order for N-Phenylmaleimide?
For more information or to place an order, you can contact Yangchen Tech through our website or customer service hotline. Our team is ready to provide detailed product information, support, and assistance with your specific requirements.
This FAQ provides a detailed overview of N-Phenylmaleimide (NPMI), its applications, benefits, safety precautions, and reasons to choose Yangchen Tech as your supplier.
Our Warehouse
Welcome Inquiry!